| Equipment features:
1. High purity quartz inner cavity, can achieve high vacuum experimental conditions;
2. Wrap type heating design, fast heating, accurate temperature control, uniform temperature field;
3. Vacuum, atmosphere sintering can be.
4. Stable and reliable control, easy operation, and perfect safety protection measures.
5. Adopt advanced PID self-learning fuzzy control, high temperature control accuracy, keep at ±1℃.
6. The lining of the furnace is made of high-purity alumina light fiber material, which has better insulation effect and energy saving and consumption reduction.
7. With the Internet of Things function (WIFI), the device can be monitored and operated remotely through mobile phones and computers.
8. Data storage function, which can save the important parameters of sintering, up to 30 days (8 hours a day).
9. Formula function, can pre-store 20 formula.
10. Networking function, through the RJ45 interface, using TCP/IP protocol, can make the system connected to the upper computer (the upper computer needs to install the corresponding software). |
Model | NBD-VAH1200-30TIF |
Electrical Spec | AC380V 10KW |
Heating element | High quality iron chrome aluminum alloy wire |
Temp Accuracy | ±1℃ |
Thermocouple type | K-type |
Tmax | 1100℃ |
heating chamber size | φ300*690mm |
chamber size | L1100×D1100×H1650mm |
Heating rate | ≤10℃/min |
System vacuum | 10Pa |
temperature field distribution | | This is the temperature zone diagram of the device |
Control system | | 1, sintering process curve setting: dynamic display setting curve, equipment sintering can prestore multiple process curves, each process curve can be set freely; 2, can be reserved sintering, to achieve unattended sintering process curve sintering;
3, real-time display of sintering power and voltage information and record sintering data, and can be exported to achieve paperless recording;
4, with remote control, real-time observation of equipment status;
5, temperature correction: the difference between the main control temperature and the sample temperature, the whole sintering process for nonlinear correction. |
Temp Accuracy | +/- 1 ℃ |
Quartz Chamber | |
Gas supply system and pressure measurement | | Mechanical pressure gauge with damping oil, and 1 small flow high-precision float flowmeter |
| Quartz door plug | | |
Net weight | Approx.300KG |
Cautions | 1. When the equipment is used, the pressure in the furnace tube shall not exceed 0.15MPa (absolute pressure) to prevent damage to the equipment caused by excessive pressure;
2. When used under vacuum, the operating temperature of the equipment shall not exceed 1000℃.
3. When the internal pressure of the gas supply cylinder is high and the gas is passed into the furnace tube, the pressure reducing valve must be installed on the cylinder. It is recommended to choose a small pressure reducing valve for test.
4. When the temperature of the furnace body is higher than 1000 ° C, the furnace tube can not be in a vacuum state, and the pressure in the furnace tube needs to be equivalent to atmospheric pressure and maintained at normal pressure to prevent damage to the chamber;
5. Long-term use temperature of high-purity quartz tube under atmospheric pressure ≦1150℃;
6. When heating and sintering, the exhaust valve should be opened to avoid chamber pressure increase when heating and heating, resulting in chamber rupture. If it is necessary to close the air valve to heat the sample, it is necessary to always pay attention to the indicator number of the pressure gauge. If the pressure of the barometer is within the indicated safety range, if the absolute pressure and reverse pressure are ≦0.05Mpa or the positive pressure ≧0.15Mpa, the exhaust valve must be opened immediately to prevent accidents (such as chamber rupture);
7. When this equipment is used for high-temperature sintering, it must be connected to the water cooler to operate, so as to avoid melting of the high-temperature sealing silicone ring.
8. Carefully sintering materials containing alkaline ions, alkaline ions will cause crystallization damage to the cavity or. |
Service | 2-year limited warranty with lifetime support (warranty does not cover consumable parts such as quartz cavities and O-rings) |
