- Phone: 972-545460610
- 1.Tube Furnaces
- 2.Hydrogen Reduction Furnace
- 3.Shimmy Rotary Furnace
- 4.RTP Annealing Furnace
- 5.PECVD System
- 6.CVD System
- 7.Muffle Furnaces
- 8.Vacuum Muffle Furnace
- 9.Well Type Sintering Furnace
- 10.Bottom Loaded Sintering Furnace
- 11.Dental Sintering Furnace
- 12.Smelting And Quenching Furnace
- 13.Vacuum Pump System
- 14.Gas Mixing System
- 15.Commonly Used Accessories
- 16.Relevant Equipment
- 17.Industrial Furnace
- 18.Customer Unique Design
- Address: Kibbutz Zikim, Israel
- Phone: 972-8-9122667
- Mobile: 972-54-5460610
- Email: nbd@nbdlab.com
- Email: oremir15@outlook.com
PRODUCTS
Transfer Furnace
product introduction：
NBD-ZY1200 series transfer heating furnace adopts the top heating method, and the bottom is divided into two heating zones: preheating zone and heating zone. Especially applicable to:
1. The roasting of the type of material is heated rapidly at high temperature (after the preheating zone is heated to the required temperature, it can be transferred to the heating zone to heat the sample quickly);
2. The preheating zone and the heating zone can heat two samples respectively, with high working efficiency;
3. Good insulation effect, less heat loss, and obvious energy-saving and emission reduction effect;
4. The heating temperature is precisely controlled, and the heat conduction on the back side of the sample is detected after the front side is heated to a certain temperature;
5. The heat conduction data of the sample were recorded in time, and the data were exported with sharp contrast.
Technical parameters:
※ Does specifications：NBD-ZY1200-ⅠT
※ Temperature control precision：±1℃
※ touch screen size：7 inches
※ Rated voltage：two-phase~380V
※ Rated power：5KW
※ Sensor type: S thermocouple,K thermocouple
※ Maximum temperature：1450℃
※ Rated temperature：1300℃
※ Size of heating zone: 400mm long * 360mm wide
※ Size of furnace body: 1360×950×1140mm
※ Recommended heating rate: 10℃/min
※ Weight: about 330KG
