- Phone: 972-545460610
- 1.Tube Furnaces
- 2.Hydrogen Reduction Furnace
- 3.Shimmy Rotary Furnace
- 4.RTP Annealing Furnace
- 5.PECVD System
- 6.CVD System
- 7.Muffle Furnaces
- 8.Vacuum Muffle Furnace
- 9.Well Type Sintering Furnace
- 10.Bottom Loaded Sintering Furnace
- 11.Dental Sintering Furnace
- 12.Smelting And Quenching Furnace
- 13.Vacuum Pump System
- 14.Gas Mixing System
- 15.Commonly Used Accessories
- 16.Relevant Equipment
- 17.Industrial Furnace
- 18.Customer Unique Design
- Address: Kibbutz Zikim, Israel
- Phone: 972-8-9122667
- Mobile: 972-54-5460610
- Email: nbd@nbdlab.com
- Email: oremir15@outlook.com
PRODUCTS
Rotating atmosphere furnace 1200℃
product introduction：
Based on the market demand and customer sintering process, the designer developed this production type of vacuum atmosphere rotary furnace, which can be used for the heat treatment of lithium battery anode and cathode materials, rare earth materials, chemical catalysts, magnetic materials, metal powder hydrogen reduction and other materials.Especially suitable for production enterprises, welcome new and old customers to send materials for test burning verification.
Previous
Next
Configuration details
| 1. The material is constantly flipped in the furnace tube, evenly heated, and fully in contact with the reaction atmosphere to ensure the full reaction of the material; n n2. High purity Al2O3 fiber refractory insulation material, superior insulation effect, reduce the power consumption of the equipment; n n3. Adopt advanced dynamic sealing device to ensure that the equipment can be used in vacuum and atmosphere; n n4. The product USES the fully automatic control mode, and is equipped with a 7-inch touch screen to track and display the status of the device in real time; n n5. The furnace body part can be inclined to -5-30°, which is convenient for customers to conduct discharging operation; |
|||||||||||
| Product model | NBD-RT1200-200IIT | NBD-RT1200-200IIIT | |||||||||
| Electrical specifications | AC380V 12KW | AC380V 18KW | |||||||||
| The highest temperature | 1200 ℃ （<1H） | ||||||||||
| Continuous temperature | 1100 ℃ | ||||||||||
| Maximum heating rate | ≤ 20 ℃/min | ||||||||||
| Heating zone length | 600mm | 900mm | |||||||||
| The furnace pipe size | |||||||||||
| Control system | 1. Adopt full automatic control mode to display the real-time data of the device on the touch screen; n n2. The experimental process is more intuitive and the operation is more convenient; n n3. It has the functions of over temperature alarm, broken couple prompt, leakage protection and so on. |
||||||||||
| The temperature precision | +/- 1 ℃ | ||||||||||
| Heating element | Mo – doped fe-cr-al alloy | ||||||||||
| Sealing system | |||||||||||
| Vacuum degree: ≤10Pa (mechanical pump) | |||||||||||
| Pressure measurement and monitoring | Mechanical pressure gauges with damping oil are used to reduce the back and forth swing of the pointer. | ||||||||||
| Gas supply system | The float flowmeter is used to control the gas velocity, which is integrated with the equipment and has been tested for air leakage before delivery. | ||||||||||
| The net weight | 60KG/120KG | ||||||||||
| Equipment precautions | 1. When the furnace temperature of the equipment is ≥300℃, do not open the furnace to avoid damage; n n2. When the equipment is in use, the pressure inside the furnace shall not exceed 0.125mpa (absolute pressure) to prevent damage caused by excessive pressure; n n3. The equipment is recommended to handle micron powder or granular sample, nano powder is not recommended to use this product; n n4. When used under high vacuum (10 to the minus 3 Pa), the operating temperature of the equipment shall not exceed 800℃. |
||||||||||
| Service support | 1 year warranty with lifetime support (warranty does not include consumable parts such as furnace tube and sealing ring). | ||||||||||
