NBD LABS ISRAEL PROFESSIONAL TOP SERVICE

NBD LABS ISRAEL PROFESSIONAL TOP SERVICE

NBD LABS ISRAEL PROFESSIONAL TOP SERVICE

Large Bell Jar Sintering Furnace

product introduction：

Product introduction	1600℃ series bell jar furnace, high quality, excellent performance
Applicable temperature range	The applicable temperature of this type of electric furnace is 600℃ ~ 1600℃
Product use	Widely used in ceramics, metallurgy, electronics, glass, chemical, machinery, refractory, new materials development, special materials, building materials and other fields of production and experiment.
The main features	Easy to operate, programmable, PID self-tuning, automatic heating, automatic insulation, automatic cooling, no need to guard; It can communicate with other computers and operate the electric furnace (start the electric furnace, stop the electric furnace, suspend the temperature rise, set the temperature rise curve, store the temperature rise curve, historical curve, etc.). Double layer furnace shell, the furnace body by fine spray corrosion resistance acid and alkali resistance, the furnace body and the furnace chamber isolation by air cooling, shell surface temperature is less than 45℃. Energy saving: the furnace chamber is made of imported fiber, resistant to high temperature, rapid heat and cold, good insulation performance. Fast heating (the heating rate is adjustable from 1℃/h to 40℃/min) Dual circuit protection (overtemperature, overpressure, overcurrent, broken couple, power off, etc.) Mute electronic relay Standard configuration digital PID controller, adjustable temperature curve, temperature and time. Excessive temperature alarm and power off, leakage protection, safe and reliable operation.
Technical parameters	Maximum operating temperature	1600℃
	Continuous operating temperature	1550℃
	Temperature control system	PID program temperature control
	Working voltage:	AC 380V/50HZ
	Heating element:	Silicon molybdenum rods
	Temperature control precision:	± 1℃
	Heating rate:	20°C/min
	refractory	High purity alumina fibreboard
Heating element	Silicon molybdenum rods
Customers can choose	1. Crucible, sagger, corundum furnace gasket/silicon carbide gasket 2. Computer control software and hardware 3. Touch screen temperature controller 4. Add exhaust port 5. Consumables: heating element 6. Add observation port
Matters needing attention	1. In order not to affect the service life of the electric furnace, we suggest that the maximum heating rate and cooling rate should be 10-20℃/min, (the service life of heating elements will be shortened if heating is too fast at high temperature). 2. The equipment has no vacuum sealing structure, and is not accessible to inflammable and explosive gases. 3. It is not recommended to pass in corrosive gases. If you want to pass in strongly corrosive gases including S and Na, please inform us in advance. 4. Do not leak the high-temperature solution to the bottom of the furnace, and avoid using backing plate or aluminum oxide powder isolation. 5, the instrument should be placed in the air circulation, not wet place.
Temperature measuring element/temperature measuring range	B dividing thermocouple (double platinum-rhodium)
Optional accessories	Alumina crucible, computer control software, movable furnace rack, pad brick, paperless recorder, etc.
The quality assurance period	One year warranty period, lifetime maintenance, except related consumables, such as heating element, thermocouple and other consumables.
The customer to choose	Can support non-calibration do, welcome to call 400-000-3746

Open chat