- Phone: 972-545460610
- 1.Tube Furnaces
- 2.Hydrogen Reduction Furnace
- 3.Shimmy Rotary Furnace
- 4.RTP Annealing Furnace
- 5.PECVD System
- 6.CVD System
- 7.Muffle Furnaces
- 8.Vacuum Muffle Furnace
- 9.Well Type Sintering Furnace
- 10.Bottom Loaded Sintering Furnace
- 11.Dental Sintering Furnace
- 12.Smelting And Quenching Furnace
- 13.Vacuum Pump System
- 14.Gas Mixing System
- 15.Commonly Used Accessories
- 16.Relevant Equipment
- 17.Industrial Furnace
- 18.Customer Unique Design
- Address: Kibbutz Zikim, Israel
- Phone: 972-8-9122667
- Mobile: 972-54-5460610
- Email: nbd@nbdlab.com
- Email: oremir15@outlook.com
PRODUCTS
1500℃High Temperature Tube Furnace
product introduction：
This high temperature tube furnace not only has excellence and appearance of the process, but also in high temperature operation when the enclosure is still safe to touch, after our technical staff is the most valuable long-term repeatedly adjust the position of the temperature measurement points for temperature measuring point temperature extremely close to the actual temperature inside, at the same time it also very precise control of the temperature.The tube furnace in the high temperature field adopts acid-alkali resistance, high-temperature resistance, long service life corundum tube as the carrier of heating and sealing, making the equipment more stable.
Previous
Next
Configuration details
| 1. High purity alumina furnace tube, excellent corrosion resistance and high temperature resistance; n n2. High purity Al2O3 fiber refractory insulation material, superior insulation effect, effectively reduce the power consumption of the equipment; n n3. The furnace body adopts double-layer air-cooled structure technology to greatly reduce the surface temperature of the shell; n n4. Intelligent PID fuzzy temperature control, centralized control of 7-inch touch screen, intuitive display of “time-temperature” curve; |
|||||||||||
| Product model | NBD-T1500-50IT | NBD-T1500-60IT | NBD-T1500-80IT | ||||||||
| Electrical specifications | AC220V 3KW | ||||||||||
| Highest temperature | 1500 ℃ （<1H） | ||||||||||
| Continuous temperature | 1450 ℃ | ||||||||||
| Maximum heating rate | ≤ 20 ℃/min | ||||||||||
| Heating zone length | 310mm | ||||||||||
| The furnace pipe size | Φ50*1000mm | Φ60*1000mm | Φ80*1000mm | ||||||||
| Temperature field distribution | As shown in the figure: here is the graph of the temperature range of the device | ||||||||||
| Control system | 1. Adopt full automatic control mode to display the real-time data of the device on the touch screen; n n2. The experimental process is more intuitive and the operation is more convenient; n n3. It has the functions of over temperature alarm, broken couple prompt, leakage protection and so on. |
||||||||||
| The temperature precision | +/- 1 ℃ | ||||||||||
| Heating element | High purity silicon carbon rod | Adopt high purity silicon carbon rod with good corrosion resistance | |||||||||
| Sealing system | |||||||||||
| Vacuum degree: ≤10Pa (mechanical pump) | |||||||||||
| Pressure measurement and monitoring | Mechanical pressure gauges with damping oil are used to reduce the back and forth swing of the pointer. | ||||||||||
| Gas supply system | The float flowmeter is used to control the gas velocity, which is integrated with the equipment and has been tested for air leakage before delivery. | ||||||||||
| The net weight | 30KG | 45KG | |||||||||
| Equipment precautions | 1. When the equipment is in use, the pressure inside the furnace shall not exceed 0.125mpa (absolute pressure) to prevent damage caused by excessive pressure; n n2. When used under high vacuum (10 to the minus 3 Pa), the operating temperature of the equipment shall not exceed 800℃. n n3. Before using the equipment, please read the precautions for using corundum products carefully; |
||||||||||
| Service support | 1 year warranty with lifetime support (warranty does not include consumable parts such as furnace tube and sealing ring). | ||||||||||
