Configuration

   

       

Equipment features:

1, high purity process space;

2, equipped with closed sample loading fixture, which can realize the stable control of high vacuum state during powder material sintering;

3, open sample loading platform design, matching a variety of forms of sample sintering experiment;

4, scientific and reasonable design, can easily achieve high vacuum, ultra-high temperature and low radiation of external heat.

Model

Three-phase 380V/50HZ 

heating system
Tmax2750℃

Rated power

20KW
Boundary dimensionL1000*H1270*W650mm
Master heating rate≤5℃/min
Heating chamber size120*60*60mm
Effective volume6ml
Heating and loading area 

temperature measurer

Two-color infrared thermometer resolution 0.1℃ repeatability ±2℃ protection class IP65
Temp Accuracy±1℃
Master insulation materialPressed high purity graphite hard felt
Structure operation modeUpper open heating integral sealing, furnace body and top cover double water cooling
control system
Control mode

、

1, sintering process curve setting: dynamic display setting curve, equipment sintering can prestore multiple process curves, each process curve can be set freely;
2, can be reserved sintering, to achieve unattended sintering process curve sintering;
3, real-time display of sintering power and voltage information and record sintering data, and can be exported to achieve paperless recording;
4, with remote control, real-time observation of equipment status;
5, temperature correction: the difference between the main control temperature and the sample temperature, the whole sintering process for nonlinear correction.

Temperature curve settingThe main heating can pre-store 15 temperature curves, each curve can be set 20 “time-temperature curve”, real-time monitoring, dynamic real display of “time-temperature curve”
temperature correctionMaster the difference between the temperature control temperature and the sample temperature, the system is nonlinear correction throughout the whole process (ask the customer common temperature points, do special effect)
data loggingReal-time monitoring, dynamic real display of “time-temperature curve”
system protectionOvertemperature alarm, overcurrent protection, thermocouple break warning
Gas supply system
Flowmeter type1 float flowmeter (mass flow controller can be selected according to experimental needs)
Gas pipe coreSpecial stainless steel gas piping (1/4″)
Regulating valve typemanual control valve
Pipeline normalitynormal close
Temp Accuracy±1.0%F.S
degree of linearity±0.5%F.S
repeated accuracy±0.2%F.S
pressure range-0.1-0.15 MPa
response time2S
Accuracy guaranteed temperature(15～35℃)
vacuum system
High vacuum system 
mechanical vacuum pump10C direct rotary vane vacuum pump (Double stage rotary vane)
pumping rate(10(L/s)
Inlet and exhaust connection portKF16/25（mm）
oil capacity0.6～1L
motor speed1440（rpm）
operating ambient temp.5～40℃

Noise (dB)

≤56
molecular pumpFJ-110molecular pump
pumping rate100(L/s)
rated speed4300R/min
type of coolingAir/water cooled
Else
Vacuum gauge typeAnalog vacuum gauge
Total system limit vacuum4.3×10-3Pa

Service

One year limited warranty with lifetime support (warranty does not include consumable parts)