Configuration

 

Main features:

1. Integrated liquid gasification system, which can provide stable reaction gas conditions including toxic liquids;

2. Cleaning and coating in one go, to eliminate secondary pollution;

3. Upper open structure, easy to observe the sample;

4. The product adopts automatic control mode, touch screen, digital display;

5. High degree of equipment integration;

6. Stable radio frequency power supply, uniform temperature distribution, improve the quality of film forming;

7. Excellent electromagnetic shielding scheme, efficient and safe.

Model

NBD-PE1200-80TID2FY

Power supply

AC220V 50/60HZ

Temp Accuracy

±1℃

Touch screen size

7 inches

RF frequency

13.56MHz

Rf power output range

0-200W

Deposition heating rating

4.0KW

Rated evaporator power

1.3KW

Tracking zone rating

75W

Sensor type

Type K thermocouple

Maximum deposition temperature

1200℃

Rated deposition temperature

1150℃

Rated evaporator temperature

400℃

Rated temp of heat-tape

150℃

Recommended heating rate

≤10/min

Deposition tube diameter

Φ80mm*1200mm
Pipe diameter of evaporation source

Φ50mm*80mm

Effective volume of evaporation source

50ml

Boundary dimension(PECVD)

L1500×H1280×D760mm

Boundary dimension(evaporator)

L410×H350×D210mm

Atmospheric condition

Gas mixture, vacuum, etc

Mechanical pump pumping rate

16 m3 /h

Maximum vacuum of furnace chamber

3~5Pa

Flange construction

Aviation aluminum fast opening mode;

Operating system

NBD-101EP centralized bus control integrated system, 7″ full touch screen control, intelligent fuzzy PID control; Intelligent man-machine dialogue mode;

Vaccum test

Digital vacuum gauge;

Equipment details

 

 

 

Control system

 1, sintering process curve setting: dynamic display setting curve, equipment sintering can prestore multiple process curves, each process curve can be set freely;
2, can be booked sintering, unattended sintering process curve sintering;
3, real-time display of sintering power and voltage information and record sintering data, and can be exported to achieve paperless record;
4, with remote control, real-time observation of equipment status;
5. Temperature correction: the difference between the main control temperature and the sample temperature, and the whole sintering process is nonlinear correction.

Partial interface

 

 

Net weight

Approx.300KG

Cautions   

1. The RF matcher is generally in the automatic matching state, and the general power needs to reach more than 50W to match;

2. If manual matching is adopted, set the power to about 60W, and increase the power when manual tuning matches properly.

Service

One year limited warranty to provide lifelong support;

 Disclaimer:

 The product introduction content of this site (including product pictures, product descriptions, technical parameters, etc.) is for reference only. There may be some difference between the stated content and the actual situation due to the delay in updating. Please contact our customer service staff for confirmation. The information provided by this Site does not constitute any offer or acceptance. NOBODY will improve and modify any information on this site from time to time without prior notice.