Equipment introduction：

Automatic feed in and out pendulum rotary sintering furnace is suitable for the treatment of short time heating materials. First, the equipment is heated to reach the target temperature, and then the furnace body is adjusted to a certain tilt Angle, and the feed reamer is opened to continuously feed the material into the furnace tube. The material passes through the heating area of the working tube and enters the storage tank from the other end. The length of the heat treatment time depends on the inclination of the furnace tube, the rotation speed, the length of the furnace tube and the fluidity of the material. The use of a stainless steel storage container, coupled with a closed inlet and outlet system, is a key factor in the product can be used in a protective atmosphere or vacuum (should not be used if the sintering temperature is too high).