Features of equipment | 1. Liquid flow control system: intermediate high precision transmission, small flow liquid high precision transmission, flow range: 0.04 ~ 36ml/min;
2. Atomizing device: Equipped with a 1.7MHz ultrasonic atomizer, which can atomize liquid into liquid particles and import them into tubular furnace;
3. Heating system (tubular furnace can be customized) : the highest temperature can reach 1200℃. |
Electrical Spec | AC220V 1.2KW |
Tmax | 1200 °C |
Max working temps. | 1100℃ |
Heating rate | ≤ 20 ℃/min |
Heating length | 200mm |
High precision peristaltic pump | 
| 1. Speed range: 0.1·100rpm reversible reversible;
2. Speed resolution: 0.1rpm;
3. Speed regulation mode: film key;
4. Display mode: 4-bit LED displays current speed or current flow rate;
5. Strengthen PP material, corrosion resistance;
6. Flow rate: 0.04-36ml/min;
7. Equipped with full speed key to realize fast emptying and adding;
8. With power failure memory function, save running parameters in time. |
atomizer | 
| 1.AC220V, 1.7MHz ultrasonic atomizer;
2. The liquid tank is standard PTFE material, corrosion resistant, and sealed with silicone sealing ring;
3. Atomizing flow rate can be realized by controlling gas flowmeter;
4. Continuous operation of atomization can be realized. |
Control system | 
| 1. 15 temperature curves can be pre-stored to avoid the trouble caused by repeated setting of different experimental processes;
2. The experiment process is more intuitive and the operation is more convenient;
3. Optional wireless control module to realize remote control;
4. With overtemperature alarm, broken couple prompt, leakage protection, etc. |
Temp Accuracy | +/- 1 °C |
加热元件 | 
| Mo掺杂的Fe-Cr-Al合金 |
Heating element | 
| The standard configuration has a float flowmeter with a range of
60-600ml/min (other ranges can be customized with sales contact) |
Net weight | 30KG |
Cautions | 1. When the furnace temperature of the equipment is greater than or equal to 300℃, it is forbidden to open the furnace to avoid injury;
2. When the equipment is in use, the pressure inside the furnace shall not exceed 0.125MPa (absolute pressure) to prevent the pressure from bursting the sealing flange;
3. When used in high vacuum (10-3Pa), the operating temperature of the equipment shall not exceed 800℃. |
Service | 1 year limited warranty with lifetime support (warranty excludes consumable parts such as handling tubes and O-rings). |