- Phone: 972-545460610
- 1.Tube Furnaces
- 2.Hydrogen Reduction Furnace
- 3.Shimmy Rotary Furnace
- 4.RTP Annealing Furnace
- 5.PECVD System
- 6.CVD System
- 7.Muffle Furnaces
- 8.Vacuum Muffle Furnace
- 9.Well Type Sintering Furnace
- 10.Bottom Loaded Sintering Furnace
- 11.Dental Sintering Furnace
- 12.Smelting And Quenching Furnace
- 13.Vacuum Pump System
- 14.Gas Mixing System
- 15.Commonly Used Accessories
- 16.Relevant Equipment
- 17.Industrial Furnace
- 18.Customer Unique Design
- Address: Kibbutz Zikim, Israel
- Phone: 972-8-9122667
- Mobile: 972-54-5460610
- Email: nbd@nbdlab.com
- Email: oremir15@outlook.com
PRODUCTS
Mini Shimmy Rotary Tube furnace 1200℃
product introduction：
Pendulum vibration rotary furnace can be used in lithium ion battery anode materials are (aluminium, manganese acid lithium iron phosphate, cobalt acid lithium, three yuan, graphite anode, etc.), rare earth materials, chemical catalytic material, magnetic material, powder metallurgy, non-ferrous metal and non-metallic mineral kaolin material calcined powders or makings shape material lab and drying, high temperature reaction, heat treatment, carbide, etc.The user can also conduct the atmosphere treatment according to the material firing process.
Previous
Next
Configuration details
| 1. Double-layer steel structure; n n2. High purity Al2O3 fiber refractory insulation material, the maximum energy saving; n n3. The high purity alumina coating on refractory ceramics can prolong the service life; n n4. Mainly for powder or particle sintering, the material is flipped dynamically in the furnace tube, and the heat is uniform, so as to realize the full reaction of the material; n n5. Excellent dynamic sealing system, can make the equipment in the process of rotation to maintain the atmosphere state; n n6. High heating efficiency, material movement increases the heating surface; n n7. Vacuum system, power supply system, gas flow rate, heating system, motion system, process, system monitoring and data collection, etc. |
|||||||
| Product model | NBD-RT1200-50ITF | ||||||
| Electrical specifications | AC220V 1.5KW | ||||||
| The highest temperature | 1200 ℃（＜1H） | ||||||
| Continuous temperature | 1150 ℃ | ||||||
| Maximum heating rate | ≤ 20 ℃/min | ||||||
| Heating zone length | 200mm | ||||||
| Effective volume | 150ml | ||||||
| Temperature field distribution | As shown in the figure: here is the graph of the temperature range of the device | ||||||
| Control system | 1. 15 temperature curves can be stored in advance to avoid the trouble caused by repeated Settings of different experimental processes;2. The experimental process is more intuitive and the operation is more convenient; n n3. Wireless control module can be selected to realize remote control; n n4. It has the functions of over temperature alarm, broken couple prompt, leakage protection and so on. |
||||||
| The temperature precision | +/- 1 ℃ | ||||||
| Heating element | Mo – doped fe-cr-al alloy high temperature heating wire | ||||||
| Sealing system | |||||||
| Vacuum degree: ≤10Pa (mechanical pump) | |||||||
| Pressure measurement and monitoring | Mechanical pressure gauges with damping oil are used to reduce the back and forth swing of the pointer. | ||||||
| The net weight | 30KG | ||||||
| Equipment precautions | 1. When the furnace temperature of the equipment is ≥300℃, do not open the furnace to avoid damage; n n2. When the equipment is in use, the pressure inside the furnace shall not exceed 0.125mpa (absolute pressure) to prevent damage caused by excessive pressure; n n3. The equipment is recommended to handle micron powder or granular sample, nano powder is not recommended to use this product; n n4. When used under high vacuum (10 to the minus 3 Pa), the operating temperature of the equipment shall not exceed 800℃. |
||||||
| Service support | 1 year warranty with lifetime support (warranty excludes consumable parts such as furnace tubes and o-rings) | ||||||
