NBD LABS ISRAEL PROFESSIONAL TOP SERVICE
NBD LABS ISRAEL PROFESSIONAL TOP SERVICE
NBD LABS ISRAEL PROFESSIONAL TOP SERVICE

PRODUCTS

High magnetic induction quenching furnace

product introduction:

High frequency induction heating principle is to use high frequency alternating current flow is curled up into a ring of conductor (usually a copper tube), the resulting magnetic beam, place the metal, magnetic beam will be well versed in the metal body, nest in and the direction of magnetic beam from paying current rotation (current) the induced current in den fever, under the influence of current in this heating mode is induction heating. Thus, a heated object, such as a metal, can be heated in a non-contact state. At this time, the characteristics of the current in the socket are concentrated induction heating on the object close to the coil on the surface of the object is strong inside the weak characteristics, with such a principle of concentrated heating in the necessary place of the heated body to achieve instant heating effect, thus the production, workload are relatively increased. The product is used for heating, melting or quenching of magnetic materials in ultra-high frequency magnetic field or in vacuum or atmosphere.

output power 6KW Cooling water requirement

 

0.2Mpa, 2 L/min
oscillation frequency 300KHZ duty cycle 80%
oscillation frequency 5A-30A  volume 580×250×500mm
output power 6KW Cooling water requirement 0.2Mpa, 2 L/min

technical parameters:

1.specifications and models:NBD-VAIP

2. Size of touch screen:7″

3.  power supply:AC220V   50HZ

4. rated power:≤6KW

5. Sensor type: infrared temperature measurement

6. Maximum temperature: 1200℃

7. Quartz chamber size: 30* 200/50 *200

8. Length of heating zone: 20mm

9. Ultra-high frequency magnetic field power supply; 300 KHZ

10.Coil can slide automatically;

11. Adopt PID control, can adjust the current manually at the same time;

12. Can vacuum or atmosphere