- Phone: 972-545460610
- 1.Tube Furnaces
- 2.Hydrogen Reduction Furnace
- 3.Shimmy Rotary Furnace
- 4.RTP Annealing Furnace
- 5.PECVD System
- 6.CVD System
- 7.Muffle Furnaces
- 8.Vacuum Muffle Furnace
- 9.Well Type Sintering Furnace
- 10.Bottom Loaded Sintering Furnace
- 11.Dental Sintering Furnace
- 12.Smelting And Quenching Furnace
- 13.Vacuum Pump System
- 14.Gas Mixing System
- 15.Commonly Used Accessories
- 16.Relevant Equipment
- 17.Industrial Furnace
- 18.Customer Unique Design
- Address: Kibbutz Zikim, Israel
- Phone: 972-8-9122667
- Mobile: 972-54-5460610
- Email: nbd@nbdlab.com
- Email: oremir15@outlook.com
PRODUCTS
Automatic Feeding And Discharging Rotary Sintering Furnace
product introduction：
This product is suitable for short time heating material processing.First, heat the equipment to reach the target temperature, then adjust the furnace body to a certain Angle, open the feed reamer to continuously feed the material into the furnace tube, the material through the heating area of the working tube, from the other end into the storage tank.The length of heat treatment time depends on the inclination, rotation speed, tube length and material fluidity of the furnace tube.The use of stainless steel storage containers, coupled with a closed infeed and infeed system, is a key factor that the product can be used in a protective atmosphere or vacuum (if the sintering temperature is too high for use).
Previous
Next
Configuration details
 |
1. The furnace tube is made of quartz furnace tube or 310S heat-resistant stainless steel; n 2. Adopt PLC centralized control, simplify operation, configure 7-inch touch screen to display all kinds of data in real time, intuitive; n 3. Alarm function is set to realize unattended sintering; n 4. It is equipped with a material level monitor, which is used to monitor the material situation. In addition, it is equipped with a vibrator to facilitate the better import of materials. n 5. High purity Al2O3 fiber refractory insulation material, superior insulation effect, effectively reduce the power consumption of the equipment; n 6. Adopt advanced and stable dynamic sealing system to ensure the equipment can be used in vacuum and atmosphere; n 7. The furnace body part can be inclined to -5-30°, which is convenient for taking and discharging materials; n |
||||||
| Product model | NBD-RT1200-100IIIT-Z | ||||||
| Electrical specifications | AC380V 8KW | ||||||
| The highest temperature | 1200 ℃ （<1H） | ||||||
| Continuous temperature | 1000 ℃ | ||||||
| Maximum heating rate | ≤ 20 ℃/min | ||||||
| Heating zone length | 900mm | ||||||
| The furnace pipe size | φ102*1400mm | ||||||
| Control system |  |
1. Adopt full automatic control mode to display the real-time data of the device on the touch screen; n 2. The experimental process is more intuitive and the operation is more convenient; n 3. It has the functions of over temperature alarm, broken couple prompt, leakage protection and so on. n |
|||||
| The temperature precision | +/- 1 ℃ | ||||||
| Heating element |  |
Mo – doped fe-cr-al alloy | |||||
| Sealing system |  |
 |
 |
||||
| Vacuum degree: ≤7Pa (mechanical pump) | |||||||
| Pressure measurement and monitoring |  |
Mechanical pressure gauges with damping oil are used to reduce the back and forth swing of the pointer. | |||||
| Gas supply system |  |
The float flowmeter is used to control the gas velocity, which is integrated with the equipment and has been tested for air leakage before delivery. | |||||
| The net weight | 60KG | ||||||
| Equipment precautions | n
1. When the furnace temperature of the equipment is ≥300℃, do not open the furnace to avoid damage; n 2. When the equipment is in use, the pressure inside the furnace shall not exceed 0.125mpa (absolute pressure) to prevent damage caused by excessive pressure; n 3.When used under high vacuum (10 to the minus 3 Pa), the operating temperature of the equipment shall not exceed 600℃. n |
||||||
| Service support | 1 year warranty with lifetime support (warranty does not include consumable parts such as furnace tube and sealing ring). | ||||||
n
