NBD LABS ISRAEL PROFESSIONAL TOP SERVICE
NBD LABS ISRAEL PROFESSIONAL TOP SERVICE
NBD LABS ISRAEL PROFESSIONAL TOP SERVICE

PRODUCTS

1200℃ Intelligent tube furnace

product introduction:

    We continue to start with the details and after more than 100 times of repeated tempering, we have created this exquisite and beautiful tube furnace with a 7-inch touch screen operating system. This product is mainly used in the fields of crystal annealing, electronic lighting, two-dimensional material sintering, atmosphere protection sintering, vacuum coating, CVD experiment, material composition determination, etc. It is trusted by researchers in various fields.

Configuration details

1. Double-layer steel structure;
n
n2. High-purity Al2O3 fiber refractory insulation material, maximum energy saving;
n
n3. High-purity alumina coating on refractory ceramics can prolong the service life;
n
n4. Alumina tube plug can help you establish a custom temperature gradient in the tube.
Model NBD-O1200-50IT NBD-O1200-60IT NBD-O1200-80IT NBD-O1200-100IT
Electrical Specifications AC220V    4KW
Max temperature 1200 ℃ (<1小时)
Operating temperature 1100 ℃ (连续)
Heating rate ≤  20 ℃/min
Heating zone length 440mm
Furnace tube size Φ50*1000mm Φ60*1000mm Φ80*1000mm Φ100*1000mm
Temperature distribution As shown in the figure: this is the temperature curve of the device (constant temperature area: 260mm)
Control System 1. 15 temperature curves can be pre-stored to avoid the trouble caused by repeated setting of different experimental processes;
n
n2. The experimental process is more intuitive and the operation is more convenient;
n
n3. Optional wireless control module is available for remote control;
n
n4. With over-temperature alarm, broken couple reminder, leakage protection and other functions.
Temperature control accuracy +/- 1 ℃
Heating element Mo-Fe-Cr-Al alloy
Sealing system
Vacuum: ≤10Pa (mechanical pump)
Pressure measurement and monitoring A mechanical pressure gauge with shock-absorbing oil is used to dampen the pressure fluctuations and reduce the pointer swinging back and forth.
Gas supply system The float flow meter is used to control the gas flow rate, which is integrated with the equipment, and the leak test has been carried out before leaving the factory.
Net weight 60KG
Notes on equipment use 1. When the furnace temperature of the equipment is ≥300 ℃, it is forbidden to open the furnace to avoid injury;
n
n2. When the equipment is used, the pressure in the furnace tube must not exceed 0.125MPa (absolute pressure) to prevent the equipment from being damaged due to excessive pressure;
n
n3. When used under high vacuum (10 minus 3 power Pa), the temperature of the equipment should not exceed 800 ℃.
Service support 1 year warranty with lifetime support (consumable parts are not included in the warranty, such as furnace tubes and O-rings)